Please Follow the instructions below to insure a proper fitting belt.
Our belts are sized based on actual measurements and not random numbers, measuring your old belt will give you the best fitting new belt.
The most accurate way to select the correct size is to measure an old belt as shown in this diagram:
If this measurement is 36" for an example only, you would order the belt size "34" Waist = 36" Belt". The belt size equals the measurement from the hook on the buckle to the hole you use the most. If in between
sizes, order the next larger size.
The second method to finding your correct size is to run a cloth tape measure through your belt loops, while wearing the pants, and pull it as snug as you would like your new belt to fit. This is also a perfect method if you wear hip huggers or lower waist pants.
The third way to order the correct size is to order the belt size 2" larger than the waist size of your pants. In recent years most of the pant manufacturing has been moved off shore and the sizing they use on pants may or may not be accurate.
The belt size is NOT the total length of a belt, it is the center hole of the finished belt.
Note: The width of our belts are 1/16th narrower then specified to allow for smooth operation with all buckles.
DO NOT order the size printed on the back of an old belt, these markings are generally the pant size and NOT the belt size or the belt may have stretched.
Note: If in between sizes, order the larger size.